The process of Automatic Cleaning System

Data transmission is the heart of every communication system, not just the communication systems instead every system that deals with receiving and sending of information requires data transmission and to have better efficiency the rate of transfer of data must be fast and should have less or no loss of information. Fibre optics is one such medium which offers you high transfer rates and accurate transmission. The data in connector optical fibre is transmitted through light waves by the process of total internal reflection so it is necessary to keep the fibres clean to alienate the losses. Due to time and usage of the fibres, dust and other particles get deposited in the fibre which obstructs the transmission.

For cleaning the fibres there are a number of processes and dry cleaning process is one of them. Dry cleaning process includes using of an air spray or an automatic machine to clean the fibre. Nowadays ferrule cleaners are used to clean optical fibres; these equipments do not take much time and are easy to use. They can be used on fixed panels and take only 3-5 seconds to clean the fibres. They are light weight and have a long end called ferrule. You can clean the fibres almost achieving 99% efficiency, which is otherwise very hard to achieve with wet cleaning methods that use solvents.

Automatic cleaning systems are widely used and are better than other processes. You can get good automated filters from www.aefos.com which is a well known company manufacturing and supplying automated ferrule cleaning system to its wide clientele.