The Widespread Importance of Fiber Optic Testing

Are you facing the network problem in office frequently? Is it become difficult for you to ascertain the real cause of data transmission faults lying in networking system of business area? Then it is high time for you to look for best fiber testing procedures.

We are living in a computer age where networking and technology holds a big place, so is the use of fiber optics. These optics work on the core process of data networks, facilitating the amicable transmission services towards buildings, data centers or campus network to work diligently without interruption. Following the latest trends of technology advancement, the use of computers and data networking systems increased manifolds to serve the consumers with best of the services with cost effectiveness.

The increased working of computer network systems to process reliable data and information for the commercial area has sometimes led to clogging of data transmission due to increased distance or limited info transferring tactics that results to opt for the testing of fiber optic. It becomes the best source of communication to check the actual speed and bandwidth of the data transmission from one point to another.  The fiber testing could be done for anything subject to transfer of data or light from one source to another.

Let us know how fiber optic testing may be used to inspect the light loss.

It’s been long time optics are used, inspected and cleaned on regular intervals to ensure right transmission of light or signals from one point to another. The testing of fiber optics is not a new process rather it is the important procedure undertaken at the time of making and installation of fiber cables that has to be used in data transmission of various commercial business purposes.

Basically there are two major problems resulting in blockage of data or light transmission from the optic cables, i.e. missing of one end face and undue contamination or damage of the wire. To overcome such situation, timely detection or testing of the fiber cable is must. Since cleaning and testing of fiber optic is the important maintenance part of the cables, so it should never be skipped or underestimated. There are many fiber optics cleaning kits readily available in the market to ease the process. All these kits come with respective cleaning or solvent tools, leaving fiber cables extremely neat and error free.

Besides the cleaning kits, there are fiber testers’tools that help in inspecting the transmission error in the cables from one end to another. Important testers for fiber optic are troubleshooting and verification testers, advanced OTDR or certification testers reliable enough to detect the errors and fix it immediately.

Also, there are companies specializing in performing fiber optic testing in all such cleaning, inspection and maintenance needs. For more information, you can visit at www.aefos.com.

Fiber Optic Cleaning is Necessary for Better Fiber Optic Signals

Brief history of Fiber optics and its uses:

Fiber optics technology, although it sounds like a technology of 21^st century, but unknown to many of us, the principle that works behind this miraculous technology is primitive and traces of this was found in year 1790, when Claude Chappe first tried to use this technology in the rear of telegraphic concept and failed. Later on in 1840, two scientists known as Daniel Colladon and Jacques Babinet, first mention tried its principle through an experiment of guiding a light from reflection.  Since then, the development in the area of fiber technology is growing rapidly. From there on, this fiber technology was used in various areas including, dentistry and other internal medical examination.  Currently, the technology is used everywhere (universities and enterprises) for data fastest data transmission, with the help of fiber optic connector. In order to have the better transmission through these connector, fiber optic cleaning has to be done regularly, failure to which may lead to failure of entire transmission.

Why the need for fiber optic cleaning does emerge?

In general, these fiber optic connectors require frequent connection and disconnection for its transmission and this practice always leaves trash in the adaptor or receptacle. The most amazing fact here is, even one micrometer of such dust particle or debris is competent enough of causing a huge signals or disorder.

What are the methods used for ferrule cleaning?

Undoubtedly, these fiber optical connectors are very expensive and transmission failure is one, which is not easy to track and troubleshoot. There are many techniques widely used for this entire cleaning process, but below one will discover about the best methods of cleaning:

·         Compressed gas cleaning: compressed cleaning is familiar as canned air, which blows the dust or rubbish out from the end face of fiber optic connector. However, the only problem with this canned cleaning is, it fails when the dust particle are below 3 microns.

·         Air Free wipes and solvents: the sole principle that works behind this method is dusting of fiber optical connectors using a specially designed lens paper, cloth, or solvent also. To the date, the frequently used solvent is IPA, which dries slowly without disrupting fiber optical signal. The disadvantage added with this technique of cleaning is, it is very unreliable and solely depends on the expertise of cleaning technician.

   

·         Swabs: the next instruments specially designed and developed for fiber optic cleaning are swabs. Although these equipments are far better than the previous one, yet they also are not reliable.

The most advanced equipments used to the fiber optic cleaning are Ferrule cleaner (AFC 3000), which is an attachment used before the dust cap of fiber optic cleaner. The need for these cleaners and fiber optic cleaning is peaking no matter whether it a cable company or telephone company. To know more about these cleaner and their availability please check http://www.aefos.com.